亚洲乱亚洲乱码11p_亚洲va中文字幕无码久_男女羞羞视频无遮挡网站_h成年动漫在线看网站无码

If there is a sudden stop phenomenon during the normal operation of the lathe, it is undoubtedly a significant fault that causes damage. It not only causes irreversible damage to the current work, but also causes certain damage to the machine itself when restarted. Moreover, when the fault is repaired and restarted, the process being processed must be restarted from scratch. Today, we, the CNC lathe manufacturer, will analyze the two main reasons for the sudden stop of the lathe for everyone.
The first step is to power off the control system, and then turn the lead screw by hand. If there is significant resistance or even no turning at all in a certain position, it indicates that there is a fault in that position. It is necessary to check whether the clearance between the screw nut and the screw or the slide insert is too tight, whether there are foreign objects in the ball guide groove of the ball screw, whether the screw is bent or deformed, and whether the flexible gear in the stepper motor reducer is loose or stuck by foreign objects.
Secondly, if the manual turning is normal, it indicates a malfunction in the control system of the CNC lathe. First, check if the connection plug of the stepper motor is in good contact. If the connection plug is in good contact, replace the faulty phase motor. If the motor is replaced and runs normally, it indicates that the original stepper motor is faulty. If the CNC lathe motor cannot work normally after being replaced, it indicates that the control part is abnormal, You can focus on checking the high-power transistor and its protective component release diode on the driver board. Generally, the probability of damage to these two components is relatively high.
The above are the two main reasons for the sudden stop of CNC lathes analyzed by Changhaishu Machinery, hoping to be helpful for everyone in operating CNC lathes in the future.